Early previewThings may change or break.

Tools & Calculators › AI assistants

Use QRPedia in your AI assistant

QRPedia runs an MCP server. Your AI assistant can call the calculator engines this site uses, then quote their numbers and sources instead of guessing. It is free and read-only, with no sign-up.

Server URLhttps://qrpedia.com/mcp

Set up your assistant

Claude

  1. Custom connectors are available on Free, Pro, Max, Ultra, Team, and Enterprise plans. A Free plan is limited to one custom connector. On a Pro or Max plan, open Customize > Connectors, choose + Add, then Add custom connector. On a Team or Enterprise plan, an Owner or Primary Owner opens Organization settings > Connectors, chooses Add, then Custom, then Web. On an Enterprise plan, a custom role with Manage access to Libraries can add one too.
  2. Add QRPedia as a remote MCP server with the URL https://qrpedia.com/mcp. No sign-in or API key.
  3. In a chat, open the + button, then Connectors, and turn QRPedia on. Open Search and tools. That menu lists the connector’s tools. You should see the fifteen tools in the table on this page.
Claude setup
Name: QRPedia
Remote MCP server URL: https://qrpedia.com/mcp
Authentication: No sign in

ChatGPT

  1. In ChatGPT on the web, open Plugins. Select the plus button, then Add custom MCP server.
  2. Add QRPedia as a remote MCP server with the URL https://qrpedia.com/mcp. No sign-in or API key.
  3. Review the tools the server returns, confirm the risk warning, then Create as a plugin and install it. The app details page lists the tools and can refresh them. You should see the fifteen tools in the table on this page.
ChatGPT setup
Name: QRPedia
Server URL: https://qrpedia.com/mcp
Authentication: No authentication

Cursor

  1. Create .cursor/mcp.json in the project, or ~/.cursor/mcp.json for every project. Customize in the sidebar also manages MCP servers.
  2. Add QRPedia as a remote MCP server with the URL https://qrpedia.com/mcp. No sign-in or API key.
  3. In chat, tools from the server are listed under Available Tools. Customize can enable or disable the server. You should see the fifteen tools in the table on this page.
Cursor setup
{
  "mcpServers": {
    "qrpedia": {
      "url": "https://qrpedia.com/mcp"
    }
  }
}

VS Code

  1. With Copilot selected, run Chat: Open Customizations and select MCP Servers. Select Add Server (+) in the User group, then HTTP (HTTP or Server-Sent Events). Enter the endpoint and a server id, then choose Global > Copilot Global, or a workspace .mcp.json.
  2. Add QRPedia as a remote MCP server with the URL https://qrpedia.com/mcp. No sign-in or API key.
  3. Open the MCP Servers list and review the available tools for this server. You should see the fifteen tools in the table on this page.
VS Code setup
{
  "mcpServers": {
    "qrpedia": {
      "type": "http",
      "url": "https://qrpedia.com/mcp",
      "tools": ["*"]
    }
  }
}

Claude Code

  1. From the project directory, run claude mcp add --transport http qrpedia https://qrpedia.com/mcp, or create .mcp.json as in the snippet. A URL entry needs "type": "http".
  2. Add QRPedia as a remote MCP server with the URL https://qrpedia.com/mcp. No sign-in or API key.
  3. Run claude mcp list and confirm the server is connected. In a session, /mcp shows the tool count beside the server. It should show 15 tools.
Claude Code setup
{
  "mcpServers": {
    "qrpedia": {
      "type": "http",
      "url": "https://qrpedia.com/mcp"
    }
  }
}

Setup steps checked against each vendor’s documentation on 13 November 2026.

What it does

It does

  • Gives the same numbers as the site, from the same engine files.
  • Puts its sources (references) in every calculator result.
  • Adds the disclaimer the tool returns. Coil and core tools end with “Design estimate from the cited sources. Measure the finished part; permeability, wire placement, and lead length move the value.” A filter design ends with “These values assume ideal, lossless parts. Real inductors have finite Q, which adds passband loss and rounds the Chebyshev ripple, so use the highest-Q inductors practical (for example powdered-iron toroids of a mix suited to the frequency). Use stable, low-loss capacitors such as C0G/NP0 ceramic or silver mica, with a voltage rating of about twice the peak RF voltage across them. In a transmitter harmonic filter, that voltage is set by the power level and impedance.”

It does not

  • Save designs, post feedback or change anything.
  • Run KiCad or ngspice, or make PDFs or plot images.
  • Do any math the site does not.
  • Offer prompt templates. Those may come with v1.1.

Tools

Fifteen tools: the nine from v1.0, plus cascade_receiver, maidenhead_grid, match_impedance and design_balun from v1.1, and filter_tolerance and design_crystal_ladder.

ToolWhat it doesMain inputsOn the site
Search
search_qrpedia Find calculators, reference pages, articles, Circuit Library entries and cores, ranked like the site search box.querySite search
Coils and cores
toroid_turns Turns for an inductance, or inductance for a number of turns, on a named core, with single-layer fit and the wire length to cut.core, mode, inductance, unit, turns, awgIron Powder Toroid Turns
filter_windings Pick a core, mix, turns and wire for every inductor in a design at a given power, with the site's flags.filter, power_w, coil_type, awgLC Filter Designer
air_wound_coil Size a single-layer air-wound coil for a target inductance.inductance_h, power_wLC Filter Designer
core_q Estimate the unloaded Q of an iron-powder toroid of mix 2 or 6 at a frequency.mix, frequency_hzLC Filter Designer
list_cores List cores with AL, size and datasheet link, filtered by family, mix or size.family, mix, max_od_in, limit, cursorToroid cores
Filters
design_lc_filter Design a passive LC low-pass, high-pass, band-pass or band-stop filter with the element values and cautions the LC Filter Designer shows.type, response, order, fc_hz, f1_hz, f2_hz, ripple_db, stopband_db, rs_ohm, rl_ohm, form, round_toLC Filter Designer
filter_response heavy · 10/minS21, S11, return loss and group delay for a design, with optional finite coil Q for band-pass loss.filter, f_start_hz, f_stop_hz, points, spacing, coil_qLC Filter Designer
filter_tolerance heavy · 10/minHow 1, 2, 5 and 10 percent part tolerances spread an LC filter response and its −3 dB edges. A seeded uniform Monte Carlo plus the all-low and all-high corners (QRPedia design rule).filter, tol_l_pct, tol_c_pct, trials, seedLC Filter Designer
export_filter The same SPICE netlist, LTspice schematic, response CSV or parts CSV the site downloads.filter, format, sweepLC Filter Designer
Receivers
cascade_receiver Gain, noise figure, MDS and IP3 for a receiver chain.blocks, bw_hzCascaded Receiver Calculator
Grid locators
maidenhead_grid Convert between a Maidenhead locator and latitude/longitude, with the cell bounds and size.grid, lat, lon, precisionMaidenhead Grid Locator
Matching
match_impedance Design L, Pi and Tee impedance matching networks, with part values, SWR bandwidth, stress and toroid or air-wound coils (EMRFD pp. 3.30-3.31).f_hz, zs, zl, z0, topology, form, q, q_side, q_min, power_w, series, qu_l, qu_cImpedance Matching Calculator
Baluns
design_balun Design a broadband transformer or balun on a ferrite core, with turns, fit, cut length and a power-stress check (Sevick, Transmission Line Transformers; Fair-Rite; ARRL Handbook 2023, Table 22.44).type, z_ohm, side, core, awg, f_low_hz, f_high_hz, m, k, power_wBalun & Broadband Transformer Designer
Crystal filters
design_crystal_ladder heavy · 10/minA Cohn or Butterworth/Chebyshev crystal ladder from measured motional parameters, with mesh capacitors, the end match, the loss estimate and the bandwidth check (EMRFD ch. 3, Zverev sec. 6.10, QEX June 1995 Fig 8).f_hz, bandwidth_hz, lm_h, qu, co_f, shape, n, rin_ohm, rout_ohm, raise, compCrystal Ladder Filter

The tool names, their order, the heavy pill and these input names are checked against the server’s tools/list.

Limits

60calls a minute per IP
600calls an hour per IP
10a minute heavy tools
  • The heavy tools share 10 a minute: filter_response, filter_tolerance and design_crystal_ladder.
  • Over a limit, the server answers 429 with a Retry-After time.
  • Each call has 2 s to finish. Requests are capped at 16 KB and responses at 256 KB.

Privacy

  • No sign-upNo account, no sign-in and no API key.
  • Read-onlyThe tools only compute and look things up. Nothing you send is saved.
  • Counts-only logsOne line a minute: calls per tool, ok and error counts and timing. The MCP server's log has no IPs, no inputs, no user agents.
  • No third partiesNo AI model inside the server and no calls to other services.

qrpedia.com's web server keeps no access log, so requests to /mcp are not recorded one by one. The MCP server itself logs only per-minute call counts and timings for each tool, never IP addresses or tool arguments. Error messages go to the server's system log; a rare one, such as a reply cut off mid-stream, can include the IP address and request headers, but never cookies or authorization headers.

Examples

“How many turns do I need on a T50-2 for 1 µH?”
The assistant callstoroid_turns
{ "core": "T50-2", "mode": "forward", "inductance": 1, "unit": "µH" }
QRPedia returns14 turns

14 turns for 1 µH on a T50-2. exact_turns 14.29. actual_inductance 0.96 µH (error_pct -4). max_single_layer_turns 39, fits_single_layer true. cut_length_cm 30, cut_length_in 12. Nominal value; AL tolerance ±5% (Micrometals datasheet).

See it on the site: https://qrpedia.com/calculators/iron-powder-toroid-calculator.html?core=T50-2

References returned with the result:

  • https://datasheets.micrometals.com/T50-2-DataSheet.pdf
  • https://www.baewire.com/v/vspfiles/files/HeavyWireChart.pdf

Every result ends: “Design estimate from the cited sources. Measure the finished part; permeability, wire placement, and lead length move the value.”

“Design a 5 W low-pass filter for 40 m and tell me how to wind the coils.”
The assistant callsdesign_lc_filter, then filter_windings
{"type": "lowpass", "response": "chebyshev", "order": 5, "fc_hz": 7000000, "ripple_db": 0.1, "rs_ohm": 50}
{"filter": {"response": "chebyshev", "type": "lowpass", "order": 5, "fc": 7000000, "rippleDb": 0.1, "rs": 50}, "power_w": 5, "coil_type": "auto"}
QRPedia returns521 pF, 1.56 µH, 898 pF, 1.56 µH, 521 pF

A 5th-order 0.1 dB Chebyshev low-pass. Cutoff 7 MHz, 50 ohm on both sides. C1 is 521 pF shunt, L2 is 1.56 µH series, C3 is 898 pF shunt, L4 is 1.56 µH series, and C5 is 521 pF shunt. The 3 dB frequency is 7.94 MHz.

At 5 W, L2 and L4 each wind on a T50-2, 18 turns. The target is 1.56 µH and the core gives 1.59 µH, 1.8% high. Each winding fits one layer, and the cut length is 15 in. The rating is provisional: ratings assume key-down carrier in still air, 25 °C rise, copper loss not included; loss above 10 MHz extrapolated. Peak flux is near the Amidon limit.

References returned with the design:

  • g-values: Matthaei, Young & Jones (1964) closed form, checked against the RF Cafe tables (https://www.rfcafe.com/references/electrical/butter-proto-values.htm and https://www.rfcafe.com/references/electrical/cheby-proto-values.htm, fetched 2026-10-28). Coupled-resonator k and q are computed from g (k = 1/sqrt(g_i g_{i+1}), q = g0 g1), converted to the 3 dB basis, and checked against Zverev sec. 6.10 Tables 6.10-1 ff., pp. 341-351, q0 = infinity rows.
  • Zverev's Handbook of Filter Synthesis (1967) sec. 5.8 pp. 168-289 and sec. 6.10
  • EMRFD for the coupled-resonator starting L (L = 10/F; Hayward, Campbell & Larkin, Experimental Methods in RF Design, ARRL, 1st ed. (2003), p. 3.14)
  • Hayward, Campbell & Larkin, Experimental Methods in RF Design, ARRL, 1st ed. (2003), p. 3.10, credited there to Cohn

References returned with the windings:

  • https://datasheets.micrometals.com/T50-2-DataSheet.pdf
  • Mix selection (mix 2 below 10 MHz, mix 6 from 10 MHz) is a QRPedia design rule based on Amidon's resonant-circuit best-Q ranges.
  • A toroid core is chosen only if it gives at least 5 turns; when none does, the result is flagged few-turns (QRPedia design rule).
  • Minimum core size follows carrier power (QRPedia design rule).
  • https://elnamagnetics.com/wp-content/uploads/library/Micrometals/Iron_Powder_Core_Selection_for_RF_Power_Applications.pdf
  • https://www.amidoncorp.com/product_images/specifications/1-35.pdf
  • https://www.amidon.de/contents/de/d584_01.html
  • https://www.baewire.com/v/vspfiles/files/HeavyWireChart.pdf

See it on the site: https://qrpedia.com/calculators/lc-filter-designer.html

Every result ends: design_lc_filter ends “These values assume ideal, lossless parts. Real inductors have finite Q, which adds passband loss and rounds the Chebyshev ripple, so use the highest-Q inductors practical (for example powdered-iron toroids of a mix suited to the frequency). Use stable, low-loss capacitors such as C0G/NP0 ceramic or silver mica, with a voltage rating of about twice the peak RF voltage across them. In a transmitter harmonic filter, that voltage is set by the power level and impedance.” filter_windings ends “Design estimate from the cited sources. Measure the finished part; permeability, wire placement, and lead length move the value.”

“Which ferrite cores come in mix 43?”
The assistant callslist_cores
{ "family": "ferrite", "mix": "43" }
QRPedia returns12 cores

Ferrite mix 43. This is the full list.

References returned with the result:

  • https://fair-rite.com/printer_friendly_datasheet.php?part=<PART>
  • https://fair-rite.com/product/toroids-<PART>/

See it on the site: https://qrpedia.com/calculators/ferrite-toroid-calculator.html

Every result ends: “Design estimate from the cited sources. Measure the finished part; permeability, wire placement, and lead length move the value.”

Every number has a source

Every calculator result carries its references, the engine version and a link to the same calculator on this site.

Check the connection

From a terminal, list the tools. The command form comes from the MCP Inspector docs.

Terminal command
npx @modelcontextprotocol/inspector --cli https://qrpedia.com/mcp --transport http --method tools/list

Checked on 17 November 2026 with a local tools/list against a server from this repo. The server listed, in order: search_qrpedia, toroid_turns, filter_windings, air_wound_coil, core_q, list_cores, design_lc_filter, filter_response, filter_tolerance, export_filter, cascade_receiver, maidenhead_grid, match_impedance, design_balun, design_crystal_ladder.